Clean Nation cleaner in blue gloves pulling a clump of hair from an open shower drain, with the drain cover beside it

How to Clean a Shower Drain – Hair, Smells & Blockages

To clean a shower drain, remove the drain cover, pull out trapped hair and scrub away visible soap residue with a soft brush. Rinse with hot tap water and check that the water flows freely. Bicarb soda and vinegar may help with light residue, but they will not reliably clear a thick hair clog. Persistent blockages, sewage smells or water backing up may require a licensed plumber.

This guide explains how to clean a shower drain safely, remove hair, manage bad smells and prevent future blockages.

What Is Blocking or Smelling in Your Shower Drain?

Shower drains collect hair, soap residue, body oils and everyday dirt. Over time, these materials can stick together and slow the flow of water.

Sometimes the drain smells unpleasant even when water flows normally.

The right cleaning method depends on the problem.

Drain ProblemPossible CauseWhat to Try
Water drains slowlyHair mixed with soap scumRemove accessible hair and clean the drain opening
Black or slimy build-upSoap residue and organic materialScrub accessible surfaces with a suitable detergent
Musty drain smellResidue or moisture around the drainClean the cover and accessible drain surfaces
Sewage-like smellDry trap or possible plumbing faultCheck for an unused drain or arrange plumbing advice
Water stays in the showerDeeper blockage or heavy hair clogStop DIY cleaning if safe basic methods do not work
Gurgling or water backing upPossible drainage system problemContact a licensed plumber

A shower drain is different from a kitchen sink drain.

Kitchen drains often collect food particles and grease, while shower drains usually collect hair, shampoo and soap residue.

For kitchen-specific cleaning methods, read our guide on how to clean a kitchen sink drain.

What Do You Need to Clean a Shower Drain?

Most routine shower drain cleaning does not require strong chemicals or expensive equipment.

Start with these basic tools.

Cleaning ItemPurpose
Rubber glovesProtect hands from dirty drain residue
Small soft brush or old toothbrushRemoves grime from the drain cover
Plastic drain hair-removal toolPulls out accessible hair
Mild dishwashing liquidHelps loosen soap residue
Hot tap waterRinses away loosened dirt
Paper towelsCollects removed hair and waste
Small container or rubbish bagHolds the debris for disposal

A flexible plastic drain stick can help remove hair near the drain opening.

Avoid forcing metal tools or homemade wire hooks into the pipe. They can scratch surfaces, become stuck or damage internal fittings.

Before starting: If someone has recently poured chemical drain cleaner into the drain, do not open it, insert tools or add another product. Follow the product’s safety instructions and seek professional advice.

Four steps to clean a shower drain: check water flow, remove the drain cover, remove hair and debris, then clean, rinse and refit

How to Clean a Shower Drain Step by Step

For most lightly dirty shower drains, physically removing hair is the best starting point.

These steps focus on accessible drain parts rather than deeper plumbing repairs.

Step 1: Check the Water Flow

Run the shower briefly and watch how quickly the water disappears.

If water flows away normally, the drain may only need routine cleaning.

If water collects around the drain cover, hair or another blockage may be restricting the flow.

Stop running water if the shower begins filling or water backs up from another fixture.

Checking the flow first helps you compare the result after cleaning.

Step 2: Remove the Shower Drain Cover

Turn off the water and put on rubber gloves.

Check how the drain cover is attached.

Some round or square covers lift out. Others have screws or locking mechanisms.

Follow the manufacturer’s instructions where available.

Do not force a cover that appears fixed into the floor or sealed with grout.

Forcing it can damage surrounding tiles, waterproofing or the drain fitting.

Once the cover is removed, place it on a towel or another suitable surface.

Step 3: Remove Hair and Visible Debris

Look inside the accessible drain opening.

Hair often collects just beneath the cover, where it mixes with soap residue.

Remove visible hair using gloved fingers or a suitable plastic hair-removal tool.

Pull it out slowly rather than pushing it deeper into the pipe.

If using a plastic drain stick, follow the product instructions and stop if you feel strong resistance.

Place the removed hair and debris in the rubbish bin.

Do not flush it down the toilet or another drain.

For a deeper blockage that cannot be safely reached, contact a licensed plumber.

Step 4: Scrub the Drain Cover and Edges

Hair removal is only part of the job.

Soap scum can also collect around the cover and accessible drain opening.

Mix a small amount of mild dishwashing liquid with warm water.

Use a soft brush to clean:

  • The top and underside of the removable drain cover.
  • Accessible edges around the drain opening.
  • Visible soap residue near the grate.
  • Any removable hair catcher or basket.

Avoid aggressive scrubbing or sharp tools that could damage metal finishes, tiles or seals.

Rinse the removable parts with clean water.

Step 5: Flush With Hot Tap Water

Once the accessible debris has been removed, run hot tap water through the drain for a short period.

This helps rinse away loosened soap residue and light dirt.

Do not use boiling water as the default method.

Very hot water may be unsuitable for some plastic pipes, seals, shower bases and fittings. It also creates a risk of burns.

Hot tap water is a more cautious option for normal drain rinsing.

If water still does not flow properly, stop rather than repeatedly filling the shower.

Step 6: Replace the Cover and Test the Drain

Fit the drain cover back into its original position.

Make sure it sits securely and does not create a trip hazard.

Run the shower briefly to check the water flow.

If the water now drains normally, the accessible hair and dirt may have been causing the problem.

If water still pools or drains very slowly, there may be a deeper blockage.

Do not keep forcing tools into the pipe.

Can You Clean a Shower Drain With Bicarb Soda and Vinegar?

Bicarb soda and vinegar are commonly recommended for household drain cleaning.

Some Australian cleaning guides suggest this method for light soap residue.

However, bicarb soda and vinegar do not reliably dissolve thick hair clogs or clear serious blockages.

When mixed, they react and produce bubbles. The fizzing may help disturb some loose surface residue, but it does not replace physical hair removal.

How to Use Bicarb Soda and Vinegar for Light Residue

Use this method only if the drain and surrounding materials are compatible and no chemical drain cleaner has been used.

A commonly suggested household method is:

  1. Remove any visible hair first.
  2. Add approximately half a cup of bicarb soda.
  3. Follow with approximately half a cup of white vinegar.
  4. Allow the mixture to fizz for around 10–15 minutes.
  5. Rinse with hot tap water.

Do not seal the reaction in an airtight container or fitting.

You don’t need to leave the mixture overnight.

If the blockage remains, repeating the treatment is unlikely to clear a compacted mass of hair.

Never add vinegar to a drain containing bleach, caustic cleaner or another chemical product. Mixing cleaning chemicals can create dangerous reactions.

For routine shower drain maintenance, a soft brush, hair removal and warm-water rinsing are usually more useful than repeated chemical treatments.

How to Clean a Linear Shower Drain

Modern Australian bathrooms often have long, narrow drains beside the shower wall.

These are called linear or channel drains.

They may have a removable cover, hair basket or collection channel.

The cleaning process is similar to a standard shower drain, but the design can create extra areas where dirt collects.

To clean an accessible linear drain:

  1. Check the manufacturer’s instructions for lifting the cover.
  2. Remove the cover without damaging the surrounding tiles.
  3. Empty the removable hair basket if one is fitted.
  4. Wipe accessible channel surfaces with mild detergent.
  5. Rinse the removable parts and refit them correctly.

Avoid disturbing waterproofing, fixed drainage connections or internal plumbing components.

Some tile-insert drains need a special lifting tool. Do not prise them up with a sharp object.

If you cannot identify how the cover is removed, ask the manufacturer or a suitable professional.

Cleaner pouring bicarb soda down a shower drain with vinegar in hand, showing steps to stop a smelly shower drain

How to Stop a Smelly Shower Drain

A smelly shower drain is not always blocked.

The odour may come from residue near the opening or from a drainage problem further down.

Soap Scum and Organic Build-Up

Hair, shampoo and body oils can collect around the drain cover.

Over time, damp residue can produce an unpleasant smell.

Removing the material and cleaning accessible surfaces with mild detergent may help.

If the smell returns quickly, the source may be deeper than the drain opening.

Dry Drain Trap

Many drainage systems use a water-filled trap to help stop sewer gases entering the bathroom.

If a shower or floor waste is rarely used, the water seal may dry out.

This sometimes happens in guest bathrooms, holiday homes or unused shower rooms.

Where the drainage system has a conventional water trap, running clean water may restore its seal.

If a sewage-like smell continues, returns quickly or affects several fixtures, contact a licensed plumber.

Biofilm and Hidden Residue

A dark, slippery layer around the drain may contain soap residue and microorganisms.

Cleaning the accessible surfaces may help remove this build-up.

However, residue deeper inside the drainage system may need professional attention.

Do not attempt to dismantle plumbing connections or internal traps unless you are appropriately qualified and authorised.

Common Mistakes When Cleaning a Shower Drain

Some DIY drain-cleaning methods may create bigger problems.

Avoid these mistakes.

Common MistakeWhy It Can Cause Problems
Using caustic drain cleaner carelesslyCan cause chemical burns and make later plumbing work dangerous
Pouring boiling water into the drainMay damage some fittings and creates a burn risk
Forcing a metal wire hanger into the pipeCan damage fittings or become stuck
Mixing different drain cleanersMay release dangerous fumes or cause harmful reactions
Leaving removed hair near the drainHair can wash straight back into the opening
Forcing a fixed drain cover openMay damage tiles, seals or waterproofing
Repeatedly using DIY methods on a deep blockageDelays proper investigation and repair

Be Careful With Chemical Drain Cleaners

Commercial drain cleaners vary in their ingredients and intended uses.

Some contain strong caustic or acidic chemicals.

These products can be dangerous if they splash onto skin or into eyes. They can also create hazards for plumbers if they remain inside a blocked drain.

Do not mix them with bleach, vinegar or other cleaners.

If a chemical product has already been used and the drain remains blocked, tell the plumber which product was applied.

If chemical exposure occurs, seek advice from the Australian Poisons Information Centre on 13 11 26. For a serious emergency, call 000.

How Often Should You Clean a Shower Drain?

Shower drains collect hair each time someone uses the bathroom.

Regular maintenance helps prevent small deposits from becoming larger blockages.

A simple schedule may include:

FrequencySuggested Maintenance
After each showerRemove visible hair from the hair catcher
WeeklyCheck the drain cover and water flow
MonthlyClean the removable cover, accessible opening and hair basket
When neededRemove fresh build-up before drainage becomes slow

These are practical suggestions, not fixed Australian cleaning requirements.

Homes with long hair, several bathroom users or pets may need more frequent hair-catcher cleaning.

Keep the Shower Area Clean

Soap residue from surrounding shower surfaces can wash towards the drain.

Regular surface cleaning can reduce the amount of grime collecting near the opening.

For cleaning shower screens without damaging their protective coating, read our guide on how to clean shower glass.

Installing a suitable hair catcher can also help prevent loose hair from entering the pipe.

Choose one that fits the drain correctly and empty it regularly so water can flow freely.

When Should You Call a Plumber for a Shower Drain?

Routine cleaning may remove hair near the drain opening, but it cannot fix every drainage problem.

A licensed plumber should investigate when:

  • Water still drains slowly after accessible hair is removed.
  • The shower repeatedly blocks within a short period.
  • Water backs up into the shower or another fixture.
  • Several bathroom drains become slow at the same time.
  • The drain makes repeated gurgling sounds.
  • A strong sewage smell persists.
  • Wastewater leaks or overflows.

For example, if the shower fills with water whenever the bathroom basin empties, the problem may involve a shared drainage pipe.

That is not a normal surface-cleaning task.

Stop using affected fixtures if wastewater is backing up. Keep people away from contaminated water and arrange appropriate plumbing assistance.

If you are renting, report persistent drainage problems to the property manager or landlord so responsibility for repairs can be assessed.

Cleaner removing hair from a shower drain beside a rental move-out checklist, house keys and moving boxes

Cleaner removing hair from a shower drain beside a rental move-out checklist, house keys and moving boxes

Cleaning a Shower Drain Before Moving Out of a Rental

Shower drain covers are easy to overlook when preparing a rental property for a final inspection.

Hair, visible soap scum and grime around the drain opening may need attention as part of normal bathroom cleaning.

Before handing back the keys, remove accessible debris, clean any removable cover using an appropriate method and check that it is securely fitted.

Do not dismantle plumbing or use harsh drain chemicals to try to fix a blockage.

If water is backing up or the drain remains blocked, report the issue to the property manager.

For wider property preparation, Clean Nation provides end-of-lease cleaning services in Sydney for suitable rental properties.

The agreed cleaning scope should be checked before booking, especially where plumbing repairs or heavy blockages are involved.

Can Professional Cleaners Help With Shower Drain Cleaning?

Professional house cleaners can help remove visible dirt, hair and soap residue around accessible shower drain areas where this work is included in the agreed service.

However, cleaning a removable drain cover is different from clearing a blocked wastewater pipe.

For normal home maintenance, Clean Nation offers house cleaning services in Australia, including bathroom cleaning tasks based on the agreed service.

A licensed plumber should handle persistent blockages, drainage repairs and deeper plumbing faults.

Get Bathroom Cleaning Help From Clean Nation

If you need help keeping your bathroom clean, Clean Nation can discuss suitable regular or one-off cleaning services.

Our cleaning arrangements can cover agreed shower surfaces, accessible fixtures, floors and other bathroom areas.

Call +61480810142 or contact Clean Nation online to discuss your cleaning needs and request a quote.

Frequently Asked Questions

1. Can You Use a Plunger on a Shower Drain?

A suitable plunger may help with some minor blockages. However, its effectiveness depends on the drain design and whether the opening can form a seal. Avoid using it if chemical drain cleaner is present, and stop if water backs up or the fitting appears damaged.

2. Is It Safe to Use a Drain Snake in a Shower?

A small, manufacturer-approved hair-removal tool may be suitable for accessible debris. Professional drain snakes can damage fittings if used incorrectly. Avoid forcing tools into bends, fixed inserts or deep pipework. Ask a plumber to handle blockages that cannot be reached safely.

3. Who Is Responsible for a Blocked Shower Drain in a Rental Property?

Responsibility depends on the cause of the blockage, the tenancy agreement and applicable state or territory laws. Tenants should report persistent problems promptly. Routine hair removal may be normal care, while plumbing faults generally require assessment by the property manager or landlord.

4. Does a Shower Drain Cover Need to Be Replaced Regularly?

Not usually. A drain cover can often remain in use for years if it is undamaged and fits securely. Replace it when it becomes cracked, badly corroded, loose or unsafe. Choose a compatible replacement and seek advice if the fitting is built into the floor.

5. Can You Use an Enzyme Drain Cleaner Instead of a Chemical Drain Opener?

Some enzyme-based products are designed to break down suitable organic residue. They may help with light build-up when used as directed, but they are not guaranteed to clear solid hair blockages. Check product compatibility, follow the label and never mix drain treatments.

Cleaning Company Autralia

About the Author

Clean Nation Team
Scroll to Top