To clean stone countertops safely, first check whether your benchtop is granite, marble, quartzite or engineered quartz. Remove crumbs, wipe the surface with warm water and a soft microfibre cloth, and use a pH-neutral stone cleaner approved for the material. Rinse away any residue and dry the surface. Avoid vinegar, lemon juice, harsh chemicals and abrasive pads, especially on natural stone.
This guide explains how to clean stone countertops (benchtops) in Australian homes, remove common stains, avoid permanent etching and protect different stone finishes.
What Type of Stone Is Your Benchtop?
Before cleaning a stone benchtop, identify the material.
Granite, marble, quartzite and engineered quartz can look similar, but they do not all react to water, acidic products and cleaning chemicals in the same way.
Some natural stone can absorb liquid and develop stains. Other materials have a protective surface that may be damaged by strong cleaning products.
| Stone Type | Main Characteristics | Safest Starting Method |
| Granite | Hard natural stone; absorption varies | pH-neutral cleaner and a soft cloth |
| Marble | Softer natural stone; sensitive to acids | Marble-safe cleaner and gentle wiping |
| Quartzite | Hard natural stone; often mistaken for marble | pH-neutral stone cleaner |
| Engineered quartz | Manufactured surface, generally low-porosity | Mild detergent or manufacturer-approved cleaner |
How Can You Identify Your Stone?
Start by checking the paperwork supplied when the kitchen was installed.
Look for the product name, manufacturer, stone supplier or care label.
If the documents are missing, contact the kitchen installer or stone supplier.
Appearance alone is not a reliable test. Some marble and quartzite slabs have very similar patterns, while manufactured surfaces can imitate natural stone.
Do not pour vinegar or lemon juice onto the surface to identify it. Acids can leave permanent marks on marble and other calcium-rich stones.
A water-drop test is sometimes used to assess natural stone sealing, but it can leave dark marks on porous surfaces. It also cannot identify every stone type.
If you are unsure what material you have, use only the gentlest suitable cleaning method until the stone is confirmed.
What Do You Need to Clean Stone Benchtops?
Most stone benchtops do not need strong cleaning chemicals for everyday care.
Gather the following:
- Two clean microfibre cloths.
- A soft, non-abrasive sponge.
- Warm water.
- A pH-neutral cleaner approved for the stone.
- A soft, dry towel.
- Rubber gloves, if recommended by the cleaning product.
Some stone suppliers allow a small amount of mild dishwashing liquid. Others recommend using only specific stone-care products.
Follow the instructions supplied with your benchtop.
Avoid using the same cloth you use for greasy dishes. It may transfer food oils back onto the stone.
Keep abrasive powders, scouring pads and strong household cleaners away from the surface.
How to Clean Stone Countertops Every Day
The safest everyday cleaning routine is usually short and gentle.
Follow these five steps after preparing meals or whenever the benchtop becomes dirty.
Step 1: Remove Crumbs and Loose Dirt
Clear plates, food containers and other loose items from the bench.
Use a clean, dry microfibre cloth to remove crumbs and dust.
Do not drag gritty particles across the surface.
Even hard stone can develop scratches or marks if abrasive material is rubbed against the finish.
Step 2: Wipe Up Spills Immediately
Blot fresh spills with a clean cloth or paper towel.
Pay particular attention to cooking oil, coffee, red wine, tomato sauce and citrus juice.
These substances can stain or damage some natural stone finishes.
Avoid spreading the spill across a larger area.
Once the liquid has been removed, clean the affected surface using an approved stone cleaner.
Step 3: Apply a Suitable Cleaning Solution
Lightly dampen a clean microfibre cloth with warm water.
Apply a small amount of approved pH-neutral cleaner if needed.
Gently wipe the benchtop, including areas where food preparation leaves grease or fingerprints.
Avoid spraying large amounts of liquid directly onto joins, edges or the area around the sink.
Do not scrub hard to remove stubborn marks.
Step 4: Remove Cleaning Residue
Follow the cleaning product’s instructions for rinsing.
Where required, use another clean cloth lightly dampened with water.
Remove any remaining detergent or cleaning solution.
This helps prevent streaks and product build-up.
For food preparation areas, remember that cleaning and sanitising are different tasks.
Cleaning removes grease and food residue. Sanitising reduces microorganisms using a suitable, correctly applied treatment.
If sanitising is needed, choose a product approved for both the stone surface and food-contact use.
Our guide on how to disinfect kitchen surfaces explains the difference in more detail.
Step 5: Dry With a Microfibre Cloth
Finish with a separate, dry microfibre cloth.
Wipe away remaining moisture, especially around taps and the sink.
Drying helps prevent water spots and visible streaks.
It also reduces how long liquids remain in contact with the stone and its joints.
For most homes, this gentle routine is enough for everyday stone benchtop cleaning.

How to Deep Clean Different Types of Stone Benchtops
Deep cleaning does not mean using stronger chemicals.
It means paying extra attention to surface residue, stubborn marks and areas that regular wiping may miss.
The correct method depends on the material.
How to Clean Granite Benchtops
Granite is a durable natural stone, but it is not completely stain-proof.
Some granite surfaces can absorb oil and other liquids if their sealing is worn or unsuitable.
For deeper cleaning:
- Remove loose dirt with a soft cloth.
- Apply an approved pH-neutral granite cleaner.
- Gently wipe greasy or marked areas.
- Follow the product’s contact-time instructions.
- Remove residue and dry the surface.
Do not use vinegar or abrasive powders as a general granite cleaning method.
Check whether the stone needs resealing if stains begin appearing more easily.
How to Clean Marble Benchtops
Marble needs more careful cleaning because its minerals react with acids.
Lemon juice, vinegar and acidic foods can dull the finish, sometimes very quickly.
Use a cleaner specifically approved for marble.
Wipe gently with a soft cloth and avoid leaving moisture or cleaning products sitting on the surface.
Remove spills as soon as possible.
If a dull ring remains after suitable cleaning, the mark may be etching rather than dirt.
More scrubbing will not repair the damaged finish.
How to Clean Quartzite Benchtops
Quartzite is a natural stone that is often confused with marble or engineered quartz.
It is generally hard and resistant to scratching, but its absorption and finish can vary.
Use warm water and a pH-neutral cleaner approved for quartzite.
Wipe the surface gently, remove any cleaner residue and dry it.
Avoid acidic and abrasive products unless the stone supplier specifically approves them.
Natural quartzite may also need sealing, depending on the slab and its finish.
How to Clean Engineered Quartz Benchtops
Engineered quartz is a manufactured surface traditionally made using quartz minerals, resins and pigments.
Many previously installed engineered quartz benchtops have a low-porosity finish and do not require sealing.
For routine cleaning, use a soft cloth with warm water and a mild detergent or manufacturer-approved cleaner.
Rinse and dry the surface.
Avoid abrasive powders, strong chemicals and prolonged exposure to high heat.
Some manufacturers offer special products for tougher marks. Use only products approved for your particular benchtop.
Important: Engineered quartz and natural quartzite are different materials. Their cleaning and sealing instructions should not be treated as interchangeable.
How to Remove Stains From a Stone Benchtop
The first step in stone stain removal is identifying what caused the mark.
A dark oil stain may need a different treatment from a coffee stain or a dull patch caused by acid.
Trying several household cleaners can make the problem worse.
| Type of Mark | Possible Cause | Recommended First Step |
| Dark greasy patch | Cooking oil or food grease | Clean with an approved stone-safe degreasing product |
| Brown or coloured stain | Coffee, tea or wine | Blot and use a suitable stone cleaner |
| White or dull ring | Possible acid etching | Stop scrubbing and assess the finish |
| Marks around taps | Water deposits or absorbed moisture | Dry the area and identify the material |
| Orange or brown mark | Possible rust | Seek advice on a stone-safe rust treatment |
How to Remove Oil and Grease Stains
Cooking oil can soak into some natural stone surfaces.
For a fresh spill, blot the oil immediately.
Clean the area with an approved pH-neutral product suitable for removing light grease.
If a dark patch remains after the surface has dried, the oil may have entered the stone.
Stone specialists sometimes use a poultice, an absorbent treatment designed to draw certain stains out of natural stone.
Some poultices contain baking soda, but that does not mean ordinary baking soda paste is safe for every finish.
Use a treatment approved for the specific stone, or ask a stone restoration specialist.
How to Remove Coffee and Wine Stains
Coffee and wine may leave coloured marks on porous natural stone.
Blot the spill quickly rather than rubbing it.
Use a suitable stone cleaner and follow its instructions.
If the stain remains, avoid experimenting with bleach, vinegar or hydrogen peroxide.
Hydrogen peroxide is used in some professional stone stain-removal methods, but it can affect certain stone colours and finishes.
A stain-removal product should be selected based on the stone type and the material causing the stain.
What About Baking Soda Paste?
Baking soda paste appears in many DIY stone-cleaning guides.
However, it is not a universal treatment.
Rubbing the paste across a polished surface can change the appearance of some finishes.
Specialist stone poultices may use baking soda or other absorbent materials, but their application methods are different from ordinary scrubbing.
If you cannot confirm that a treatment is suitable, do not apply it to an expensive stone benchtop.
Is It a Stain or an Etch Mark?
Many people mistake stone etching for a stain.
These problems look similar in some situations, but they need different treatments.
A stain happens when a substance leaves colour or residue on or within the stone.
Etching is a change to the stone surface caused by a chemical reaction, commonly involving acidic substances and calcium-rich stone such as marble.
For example, a glass containing lemon juice may leave a dull ring on polished marble.
The area can look cloudy even after it has been cleaned thoroughly.
| Feature | Stain | Etch Mark |
| Appearance | Often darker or coloured | Often dull, pale or less glossy |
| Main cause | Absorbed liquid or pigment | Chemical damage to the stone finish |
| Cleaning response | May improve with suitable stain treatment | Usually remains after ordinary cleaning |
| Possible remedy | Stone-safe stain treatment | Professional refinishing or polishing |
A mark may also involve both staining and etching.
Do not try to remove etching with vinegar, abrasive pads or repeated household cleaning.
A stone restoration specialist can assess whether the affected finish can be restored.
Sealing helps resist staining, but it does not make marble resistant to acid etching.
What Should You Never Use on Stone Countertops?
Some popular household cleaning products can damage natural stone, protective coatings or manufactured finishes.
| Product or Method | Why to Avoid It |
| White vinegar | Can etch marble and affect some stone finishes |
| Lemon juice | Acid can react with calcium-rich stone |
| Bleach | May affect stone, finishes or sealers unless specifically approved |
| Ammonia-based cleaners | May damage certain finishes or protective treatments |
| Steel wool | Can scratch the polished surface |
| Abrasive scouring powders | May dull or scratch stone |
| Melamine sponges | Can act as an abrasive on sensitive finishes |
| Strong oven cleaners | May damage stone and manufactured surface coatings |
Not all stone reacts in the same way.
A product approved for one engineered surface may be unsuitable for another.
Always follow the manufacturer’s cleaning instructions rather than assuming a general kitchen spray is safe.
Never mix different cleaning chemicals.

Should You Seal a Natural Stone Benchtop?
Many natural stone benchtops benefit from sealing because some stone can absorb water, oils and coloured liquids.
A suitable sealer helps slow down absorption.
However, sealing does not make stone completely stain-proof or resistant to every chemical.
How Often Should You Reseal Stone?
There is no single sealing schedule for every benchtop.
Some stone suppliers suggest checking natural stone every year or two. Others use longer intervals for particular products.
The correct timing depends on:
- Stone type and porosity.
- Existing sealer.
- Surface finish.
- How often the benchtop is used.
- Exposure to water, oils and cleaning chemicals.
Marble, granite and quartzite may all have different requirements.
Many engineered quartz benchtops do not need sealing.
Can You Use a Water-Drop Test?
A water-drop test is sometimes used on known natural stone to check whether the surface may be absorbing water.
However, it is not suitable as a general stone-identification test.
On unsealed or sensitive natural stone, water itself may leave temporary or lasting dark marks.
Only carry out a test when the supplier or sealer manufacturer recommends it.
Follow the specified amount of water and contact time, then dry the surface.
If the stone absorbs liquid easily or begins staining more often, ask the supplier whether resealing is needed.
Use a sealer suitable for the stone and approved for kitchen food-preparation areas.
What Does Australia’s Engineered Stone Ban Mean for Existing Benchtops?
Australia introduced a prohibition on the manufacture, supply, processing and installation of certain engineered stone benchtops, panels and slabs from 1 July 2024, subject to the applicable legal arrangements.
The ban was introduced because processing some engineered stone materials can release dangerous respirable crystalline silica dust.
Import restrictions also took effect from 1 January 2025.
Can You Keep an Existing Engineered Stone Benchtop?
Yes. Existing installed engineered stone benchtops do not need to be removed simply because of the ban.
Safe Work Australia explains that an installed engineered stone surface does not pose the same silica-dust risk when it remains intact and undisturbed.
Normal wiping and routine surface cleaning are different from mechanically processing the material.
What Should You Avoid?
Do not attempt to cut, drill, grind, sand or mechanically polish an existing engineered stone benchtop yourself.
These tasks can generate harmful silica dust and are subject to strict controls.
If the benchtop needs repairing, removing or modifying, contact a suitably qualified tradesperson who understands the applicable state or territory requirements.
The prohibition does not apply to every manufactured stone product. For example, certain porcelain and resin-free sintered stone products are excluded.
Check the product information before deciding which rules and cleaning instructions apply.
How to Keep Stone Benchtops in Good Condition
A few simple habits can help reduce stains and surface damage.
Use chopping boards. Cutting food directly on stone can mark the finish and may damage knives.
Use trivets. Keep hot pots, pans and baking trays off the benchtop to reduce the risk of heat damage.
Clean spills quickly. Oil, citrus juice, coffee and wine should not be left sitting on sensitive natural stone.
Dry the sink area. Water often collects near taps, joins and the edges of kitchen sinks.
For cleaning the metal sink without applying unsuitable products to the nearby stone, follow our guide on how to clean a stainless steel kitchen sink.
Look after nearby splashbacks. Kitchen wall tiles and grout may need different cleaning methods from the benchtop. Our kitchen tile cleaning guide covers those surfaces separately.
Keep a simple routine. Wipe stone after food preparation and include it in your regular kitchen cleaning.
For a wider maintenance plan, read our guide on how often to clean your kitchen.
When Should You Call a Professional?
Some stone benchtop problems need more than ordinary household cleaning.
Consider specialist advice if you notice:
- Deep or recurring oil stains.
- Dull patches that may be etching.
- Scratches or chips.
- Cracks around the sink or cooktop.
- Damage to the polished finish.
- Repeated staining despite normal care.
A professional stone restorer can assess suitable stain-removal, sealing or refinishing options.
For regular kitchen cleaning, Clean Nation provides kitchen cleaning services across Australia.
Our published services include benchtop cleaning, food residue removal and wider kitchen cleaning based on the agreed scope.
Let the team know if your benchtop is marble, granite, quartzite or another material so suitable cleaning products can be discussed.
Stone repairs, cutting, mechanical polishing and specialist restoration are different services and should not be assumed to be included in a regular kitchen clean.

Frequently Asked Questions
1. Can You Put a Hot Pan Directly on a Stone Benchtop?
It is safer to use a trivet. Some natural stones resist heat better than others, but sudden temperature changes can damage finishes or cause stress in the material. Manufactured quartz surfaces may also contain heat-sensitive resins.
2. Can You Use a Steam Cleaner on Stone Benchtops?
Steam cleaning is not suitable for every stone surface. Heat and moisture may affect some sealers, joints or finishes. Check the manufacturer’s instructions before using steam equipment, especially on marble, damaged surfaces or unknown stone.
3. Are Disinfectant Wipes Safe for Stone Countertops?
Only use wipes labelled as suitable for the specific stone and for food-contact surfaces where required. Some wipes contain chemicals that can affect stone or sealers. Follow the instructions for contact time and rinsing.
4. How Can You Prevent Water Rings Around Kitchen Taps?
Wipe splashes promptly and keep the area around taps dry. Check whether water is collecting near joins or seals. Persistent darkening, leaks or damaged sealant may require further inspection rather than stronger cleaning products.
5. Are Stone Benchtops Safe for Homes With Children and Pets?
An intact stone benchtop can be used as an ordinary household surface when maintained properly. Use cleaning products suited to the material, follow food-contact instructions and keep chemicals away from children and pets. Avoid DIY cutting or drilling of engineered stone.
Looking After Your Stone Benchtop
The safest way to care for a stone benchtop is to identify the material, clean gently and deal with spills quickly.
Use soft cloths and suitable cleaners rather than strong household chemicals.
If a mark remains after cleaning, check whether it is a stain, etching or surface damage before trying another treatment.
A little regular care can help reduce unnecessary damage and keep your kitchen benchtop looking its best.
For help with general kitchen cleaning, contact Clean Nation on +61480810142 to discuss your cleaning requirements.



